LoRa32u4 Development Board 868MHz/915MHz SX1276 HPD13 WiFi Transceiver Module with Antenna JST Connector


SKU: WL-034 Categories: , Tags: , , , ,


(Based on and Compatible with Adafruit Feather 32u4 RFM95 LoRa Radio- 868 or 915 MHz)

LoRa32u4 II is a light and low consumption board based on the Atmega32u4 and HPD13 915MHz LoRA module and an USB battery charging circuit. Ideal for creating long range wireless networks that can exceed 2.4 GHz 802.15.4 and similar, it is more flexible than Bluetooth LE, does not require high power unlike WiFi and offers long range.

The ATmega32u4 is clocked at 8 MHz and 3.3 V. This chip has 32 K of flash, 2 K of RAM and built-in USB to Serial communication, debugging and programming capabilities without the need for an external FTDI chip, it can also act as an HID device (mouse, keyboard, USB MIDI device, etc).

This board is also equipped with a LiPo and Liion charging circuit and a standard battery interface. It is fully compatible with Arduino. A white user led is tied to pin 13. An orange LED is used for charging status.

HPD13 wireless module, using high-performance, highly integrated RF transceiver chip SX1276 design. Advanced LoRaTM spread spectrum communication technology to ensure that the module communication distance and anti-jamming capability greatly improved, and also achieved a very low current consumption. In the LoRaTM mode, the HPD13 provides higher reception sensitivity performance, more robust anti-jamming capability, and improved communication distance and reliability compared to the same transmit and receive modules on the market. In normal (G) FSK mode, it also provides industry-specific receiver sensitivity, as well as very high communication rates. 

Features / Specifications


  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • Built in 100mA lipoly charger with charging status indicator LED
  • Reset button
  • HPD13:
  • Receive current: 10 ~ 14mA
  • Interface Type: SPI
  • Operating temperature: -40 ° C to + 85 ° C
  • Digital RSSI function
  • Automatic frequency correction
  • Automatic gain control
  • Radio wake-up function
  • Low voltage detection and temperature sensor
  • Fast wakeup with frequency hopping
  • Highly configurable packet handlers

LoRa Module

  • 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Antenna Built-in 2DBi 8CM for LORA32U4II
  • Frequency range 824M-960MHz
  • Gain: 3dbi ± 0.7dbi
  • Standing wave ratio: <= 2
  • Impedance: 50ohm
  • Connector Model: IPX13
  • Length: 12CM
  • Size: 35MM * 12MM

JST Connector

  • Electronic Wire JST-PH2.0MM-2P Small Plug Cable Terminal Connector Plug
  • Electronic wire: UL1007-26AWG standard line 7 / 0.16MM
  • 80 degrees 300V
  • Outside diameter: 1.3MM
  • Using Terminal Model: JST-PH2.0MM spacing -2P

Tutorials / Manuals / Documents

Other sources


There are no reviews yet.

Be the first to review “LoRa32u4 Development Board 868MHz/915MHz SX1276 HPD13 WiFi Transceiver Module with Antenna JST Connector”

You may also like…