Arduino Nano V3.0 with FT232 chip

Description

The Arduino Nano is a small, compact microcontroller board based on the ATmega328. It has more or less the same functionality of an standard Arduino Uno. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.

This board has the FTDI FT232 chip as the USB to Serial Programmer. CH340 Driver can be downloaded below on the downloads section.

Features / Specifications

• Microcontroller Atmel ATmega328
• Operating Voltage (logic level) 5 V
• Input Voltage (recommended) 7-12 V
• Input Voltage (limits) 6-20 V
• Digital I/O Pins 14 (of which 6 provide PWM output)
• Analog Input Pins 8
• DC Current per I/O Pin 40 mA
• 32 KB (ATmega328) of which 2 KB used by bootloader
• 2 KB (ATmega328)
• 1 KB (ATmega328)
• Clock Speed 16 MHz
• Dimensions 45mm x 18mm
• Width 18 mm
• Weigth 5 g
• USB to UART programmer chip: FTDI FT232

Tutorials / Manuals / Documents

• What is Arduino Nano? A Getting Started Guide (by rs-online.com/designspark)
• Get Started With Arduino Nano (by MrSottong)
• Arduino Nano Schematic circuit
• FT232 Software Driver Download