RA-02 LoRa Radio NODE V2.0 SX1278 (433MHZ), 3.7V Battery Holder with Antenna

2,700.00

Compare
SKU: WL-028 Categories: , Tags: , , , ,

Description

The LoRa Radio Node v2.0 based on the ATmega328P and Ra-02 433Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the for Arduino pro mini 8Mhz 3.3V bootloader, usage same as the for Arduino pro mini. This chip has 32K of flash and 2K of RAM.

On board with a 3.7V 14500 battery holder, so it can use anywhere you like. In this LoRa Radio Node, we break out 2 IIC ports, 2 analog port (A0 A1) and 2 digital port (D3 D4) with 4 pin and 3 pin 2510-I type header.

Features / Specifications

  • Power supply: 3.7V 14500 Lipo battery Or 3.7-12V DC power(VCC GND: 2PIN 2510-I Type connect)
  • Size: 40mm x 60mm
  • ATmega328P @ 8MHz with 3.3V logic/power
  • 3V regulator with 500mA peak current output
  • Hardware Serial, hardware I2C, hardware SPI support
  • 1 x PWM pins: D3
  • 12 x analog inputs: A0 A1
  • Pin #13 BLUE LED for general purpose blinking
  • 2 mounting holes
  • Reset button

 

  • These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee).
  • SX1278 LoRa based module with SPI interface
  • Packet radio with ready-to-go for Arduino libraries
  • Max transmit power:18±1dBm
  • Working current: TX-93mA Rx-12.15mA Standy-1.6mA
  • IPEX connector

Package List:

  • 1 x LoRa Radio Node v2.0 433MHz
  • 1 x IPEX interface Spring antenna

Tutorials / Manuals / Documents

Additional information

Weight 50 g
Dimensions 4 × 3 × 1 in

Reviews

There are no reviews yet.

Be the first to review “RA-02 LoRa Radio NODE V2.0 SX1278 (433MHZ), 3.7V Battery Holder with Antenna”

You may also like…