Your robotics project is now easy to control with our Motor Driver board L298N. The module is made to eliminate all the soldering and you just easily wire up here your DC gearmotor, or Stepper motors. The board is based on L298N chip which is commonly used by hobbyists. This is the same motor driver board we used for the Line Follower Kit and for all other robotic car project applications. The board can driver 2 dc motors or 1 stepper motor and can handle current up to 2A at voltage ranging from 4.5V to 30V.
The board has ENA and ENB Pins to control the speed of the motor by supplying this pin with PWM. 4 input pins o control the direction of the motor IN1 and IN2 for motor A and IN3 and IN4 for motor B. An on board LED is also present to visually monitor the direction control pins. An on board 5V regulator is also included which is a good plus, you now have a common 5V rail for all your modules and sensors.
- Motor supply : 6 to 30V
- Control Logic : Standard TTL Logic
- Current Rating : Up to 2 A
- Enable and Direction Control Pins
- 4 Direction LED indicators